Level & Pump Controls

Flow-Control will maintain high-low liquid levels in your tanks, empty sumps when full, fill tanks automatically!!!

Other uses include actuating pumps, triggering solenoid valves, plus turning off heaters if fluid is lost from tanks.

High or low level alarms or secondary pump starts are optionally available for any model. Conduit connection is standard.

Prevention of running pumps dry is a great cost saving for most companies.

• HIGH OR LOW LEVEL CONTROL SIGNALS TURN PUMPS, TANKS, HEATERS ON AND OFF.
• EXTRA CONTROL TO PREVENT FIRES AND OTHER SAFETY HAZARDS.

1. Units available 6 inches to 20 feet long.
2. Specify Flow Control Type 1 or Type 2. See diagram A.
3. Specify voltage: 24 VAC or 120 VAC (Standard). Wire fractional motors direct thru 1 HP single phase (Part No. FC-LLC-10).
4. Indicate mounting bracket desired. Bracket A, B or C (included in price of standard unit). See diagram B
5. Give all level control dimensions from top of vessel. Describe function to be performed at each level. If indicator lights or alarms are required, also diagram these positions. For example: P1 stop pump 6″; P2 start pump 24″; P3 ring low level alarm 29″. See diagram A.

Notes:
– The lowest switch position must be 3″ above the bottom of the vessel: if not a well is required.
– Switches can be no closer than 2″ from each other.

FilterChem™ liability is expressly limited to the product itself. Under no circumstances is FilterChem™ liable for incidental or consequential damages.

WARRANTY VOID IF SEAL IS BROKEN.

• For ordering, please complete the Level & Pump Control order form, send completed form to Sales@heritagepro.com

Level & Pump Control Order Form.pdf